This section of the document by Hans, <firstname.lastname@example.org>. Last updated on May 4, 2007, by Bart Oldeman.
Most of DOSEMU configuration is done during runtime and per default it can use the system wide configuration file dosemu.conf (which is often situated in /etc or /etc/dosemu) optionally followed by the users ~/.dosemurc and additional configurations statements on the commandline (-I option). If /etc/dosemu.users exists then dosemu.conf is searched for in /etc and otherwise in /etc/dosemu (or an alternative sysconfdir compiletime-setting).
The default dosemu.conf and ~/.dosemurc have all settings commented out for documentation purposes; the commented out values are the ones that DOSEMU uses by default. Note that a non-suid type of installation does not need the dosemu.users and dosemu.conf files, and the main per-user configuration file is $HOME/.dosemurc. However, for security reasons, a suid-root installation will not run without dosemu.users, and in that case certain dosemu.conf settings are ignored by ~/.dosemurc.
In fact dosemu.conf and ~/.dosemurc (which have identical syntax) are included by the systemwide configuration script global.conf which, by default, is built into the DOSEMU binary. As a normal user you won't ever think on editing this, only dosemu.conf and your personal ~/.dosemurc. The syntax of global.conf is described in detail in README-tech.txt, so this is skipped here. However, the option -I string too uses the same syntax as global.conf, hence, if you are doing some special stuff (after you got familar with DOSEMU) you may need to have a look there.
The first file expected (and interpreted) before any other configuration (such as global.conf, dosemu.conf and ~/.dosemurc) is /etc/dosemu.users or /etc/dosemu/dosemu.users. As mentioned above, this file is entirely optional for non-suid-root (default) installations. Within this file the general permissions are set:
which users are allowed to use DOSEMU.
which users are allowed to use DOSEMU suid root.
which users are allowed to have a private lib dir.
what kind of access class the user belongs to.
what special configuration stuff the users needs
and further more:
whether the lib dir (DOSEMU_LIB_DIR) resides elsewhere.
setting the loglevel.
Except for lines starting with `xxx=' (explanation below), each line in dosemu.user corresponds to exactly one valid user count, the special user `all' means any user not mentioned earlier. Format:
[ <login> | all ] [ confvar [ confvar [ ... ] ] ]
The below example is from etc/dosemu.users.secure, which you may copy to /etc/dosemu.users.
root c_all # root is allowed to do all weird things nobody nosuidroot guest # variable 'guest' is checked in global.conf # to allow only DEXE execution guest nosuidroot guest # login guest treated as `nobody' myfriend c_all unrestricted private_setup myboss nosuidroot restricted private_setup all nosuidroot restricted # all other users have normal user restrictions
The use of `nosuidroot' will force a suid root dosemu binary to exit, the user may however use a non-suid root copy of the binary. For more information on this look at README-tech, chapter 11.1 `Privileges and Running as User'
Giving the keyword `private_setup' to a user means he/she can have a private DOSEMU lib under $HOME/.dosemu/lib. If this directory is existing, DOSEMU will expect all normally under DOSEMU_LIB_DIR within that directory. As this would be a security risk, it only will be allowed, if the used DOSEMU binary is non-suid-root. If you really trust a user you may additionally give the keyword `unrestricted', which will allow this user to execute a suid-root binary even on a private lib directory (though, be aware).
In addition, dosemu.users can be used to define some global settings, which must be known before any other file is accessed, such as:
default_lib_dir= /opt/dosemu # replaces DOSEMU_LIB_DIR log_level= 2 # highest log level
With `default_lib_dir=' you may move DOSEMU_LIB_DIR elsewhere, this mostly is interesting for distributors, who want it elsewhere but won't patch the DOSEMU source just for this purpose. But note, the dosemu supplied scripts and helpers may need some adaption too in order to fit your new directory.
The `log_level=' can be 0 (never log) or 1 (log only errors) or 2 (log all) and controls the ammount written to the systems log facility (notice). This keyword replaces the former /etc/dosemu.loglevel file, which now is obsolete.
Nevertheless, for a first try of DOSEMU you may prefer etc/dosemu.users.easy, which just contains
root c_all all c_all
After the file dosemu.users, the file dosemu.conf (via global.conf, which may be built-in) is interpreted, and only during global.conf parsing the access to all configuration options is allowed. dosemu.conf normally lives in the same directory as dosemu.users, for instance /etc/dosemu or /etc (that is, sysconfdir in compiletime-settings). Your personal ~/.dosemurc is included directly after dosemu.conf, but has less access rights (in fact the lowest level), all variables you define within ~/.dosemurc transparently are prefixed with `dosemu_' such that the normal namespace cannot be polluted (and a hacker cannot overwrite security relevant enviroment variables). Within global.conf only those ~/.dosemurc created variables, that are needed are taken over and may overwrite those defined in dosemu.conf.
The dosemu.conf (global.conf) may check for the configuration variables, that are set in dosemu.users and optionaly include further configuration files. But once dosemu.conf (global.conf) has finished interpretation, the access to secure relevant configurations is (class-wise) restricted while the following interpretation of (old) .dosrc and -I statements.
For more details on security settings/issues look at README-tech.txt, for now (using DOSEMU the first time) you should need only the below description of dosemu.conf (~/.dosemurc)
All settings are variables, and have the form of
$_xxx = (n)
$_zzz = "s"
where `n' is a numerical or boolean value and `s' is a string. Note that the brackets are important, else the parser will not decide for a number expression. For numbers you may have complete expressions ( such as (2*1024) ) and strings may be concatenated such as
$_zzz = "This is a string containing '", '"', "' (quotes)"
Hence a comma separated list of strings is concatenated. All these settings are also environment variables. You can override them by prefixing with dosemu_, e.g.
dosemu__X_title="DOS was in the BOX" dosemu
The parameter settings are tailored to fit the recommended usage of disk and floppy access. There are other methods too, but for these you have to look at README-tech.txt (and you may need to modify global.conf). We strongly recommend that you use the proposed techique. Here the normal setup:
# List of hdimages or boot directories under # ~/.dosemu, the system config directory (/etc/dosemu by default), or # syshdimagedir (/var/lib/dosemu by default) assigned in this order # such as "hdimage_c directory_d hdimage_e" # Absolute pathnames are also allowed. $_hdimage = "drives/*" $_vbootfloppy = "" # if you want to boot from a virtual floppy: # file name of the floppy image under DOSEMU_LIB_DIR # e.g. "floppyimage" disables $_hdimage # "floppyimage +hd" does _not_ disable $_hdimage $_floppy_a ="threeinch" # or "fiveinch" or empty, if not existing $_floppy_b = "" # dito for B: $_cdrom = "/dev/cdrom" # list of CDROM devices
A hdimage is a file containing a virtual image of a DOS-FAT filesystem. Once you have booted it, you (or autoexec.bat) can use `lredir' to access any directory in your Linux tree as DOS drive (a -t msdos mounted too). Look at chapter 5 (Using Lredir) for more details. If you want to create your own hdimage use "mkfatimage16" (see the manual page). To make it bootable you can make it, say, drive F:, and use "SYS F:" at the DOS prompt. The DOSEMU-HOWTO explains how to manipulate it using mtools.
You can also specify a Linux directory containing all what you want to have under your DOS C:. Copy your IO.SYS, MSDOS.SYS or equivalent to that directory (e.g. DOSEMU_LIB_DIR/bootdir), set
$_hdimage = "bootdir"
config.sys autoexec.bat command.com -> /dos/command.com io.sys -> /dos/io.sys msdos.sys -> /dos/msdos.sys dos -> /dos/dos bc -> /dos/bc windows -> /dos/windows
As a further enhancement of your drives setup you may even use the following strategy: given you have the following directory structure in one the directories where the $_hdimage setting applies (this is done by default in ~/.dosemu and in /etc/dosemu)
$_hdimage = "drives/*"
Now, what does the above `vbootfloppy' mean? Instead of booting from a virtual `disk' you may have an image of a virtual `floppy' which you just created such as `dd if=/dev/fd0 of=floppy_image'. If this floppy contains a bootable DOS, then
$_vbootfloppy = "floppy_image"
will boot that floppy. Once running in DOS you can make the floppy available by (virtually) removing the `media' via `bootoff.com'. If want the disk access specified via `$_hdimage' anyway, you may add the keyword `+hd' such as
$_vbootfloppy = "floppy_image +hd"
In some rare cases you may have problems accessing Lredir'ed drives (especially when your DOS application refuses to run on a 'network drive'), For this to overcome you may need to use so-called `partition access', use a floppy (or a "vbootfloppy"), or a special-purpose hdimage. The odd with partition access is, that you never should have those partition mounted in the Linux file system at the same time as you use it in DOSEMU (which is quite uncomfortable and dangerous on a multitasking OS such as Linux ). Though DOSEMU checks for mounted partitions, there may be races that are not caught. In addition, when your DOSEMU crashes, it may leave some FAT sectors unflushed to the disk, hence destroying the partition. Anyway, if you think you need it, you must have r/w access to the partition in /dev, and you have to `assign' real DOS partitions as follows:
$_hdimage = "hdimage.first /dev/hda1 /dev/sdc4:ro"
The above will have `hdimage.first' as booted drive C:, /dev/hda1 as D: (read/write) and /dev/sdc4 as E: (readonly). You may have any kind of order within `$_hdimage', hence
$_hdimage = "/dev/hda1 hdimage.first /dev/sdc4:ro"
would have /dev/hda1 as booted drive C:. Note that the access to the /dev/* devices must be exclusive (no other process should use it) except for `:ro'.
DOSEMU will help you find problems, when you enable its debug messages. These will go into the file, that you defined via the `-o file' or `-O' commandline option (the latter prints to stderr). If you do not specify any -O or -o switch, then the log output will be written to ~/.dosemu/boot.log. You can preset the kind of debug output via
$_debug = "-a"
Whether a numeric processor should be shown to the DOS space
$_mathco = (on)
Which type of CPU should be emulated (NOTE: this is not the one you are running on, but your setting may not exeed the capabilities of the running CPU). Valid values are: 8086
$_cpu = (80386)
To let DOSEMU use the Pentium cycle counter (if availabe) to do better timing use the below
$_rdtsc = (off) # or on
For the above `rdtsc' feature DOSEMU needs to know the exact CPU clock, it normally calibrates it itself, but is you encounter a wrong mesurement you may overide it such as
$_cpuspeed = (166.666) # 0 = let DOSEMU calibrate
If you have a PCI board you may allow DOSEMU to access the PCI configuration space by defining the below
$_pci = (auto) # or auto, or off
NOTE: `$_pci' can not be overwritten by ~/.dosemurc. The "on" setting can be very dangerous because it gives DOSEMU complete write access; you need to edit dosemu.users to enable it. In console graphics mode, some video card BIOSes need some PCI configuration space access, which is enabled by the default (auto) setting. This setting is far more restricted and less dangerous.
Starting with dosemu-1.0 there is a flexible way to handle the mapping strategy used by DOSEMU, which is needed by video emulation, EMS, DPMI and XMS support and other things to map a given page of memory to the required virtual DOS address space.
Normally DOSEMU will detect the proper mapping driver for the kernel you are using, however, in some cases you may want to define it explicitely to overcome eventual problems. For this you can specify
If you are using a kernel above 2.3.40, you may use
Note, that in case of `mapfile' and `mapshm' the size of the file or the segment depend on how much memory you configured for XMS, EMS and DPMI (see below). You should take care yourself that you have enough diskspace for 'mapfile'. For 'mapshm' the tmpfs mount option 'size=nbytes' controls the amount of space; by default it is half of the (real machine) memory.
Defining the memory layout, which DOS should see:
$_xms = (8192) # in Kbyte $_ems = (2048) # in Kbyte $_ems_frame = (0xe400) $_dpmi = (0x5000) # in Kbyte $_dosmem = (640) # in Kbyte, < 640
If you want mixed operation on the filesystem, from which you boot DOSEMU (native and via DOSEMU), it may be necessary to have two separate sets of config.sys and system.ini. DOSEMU can fake a different file extension, so DOS will get other files when running under DOSEMU. Faking autoexec.bat cannot happen in a reliable fashion, so if you would like to use an autoexec.bat replacement then just use the SHELL command in config.XXX, like this:
SHELL=COMMAND.COM /P /K AUTOEMU.BAT
$_emusys = "" # empty or 3 char., config.sys -> config.XXX $_emuini = "" # empty or 3 char., system.ini -> system.XXX
As you would realize at the first glance: DOS will not have the the CPU for its own. But how much it gets from Linux, depends on the setting of `hogthreshold'. The HogThreshold value determines how nice Dosemu will be about giving other Linux processes a chance to run.
$_hogthreshold = (1) # 0 == all CPU power to DOSEMU # 1 == max power for Linux # >1 the higher, the faster DOSEMU will be
To select the character set and code page for use with DOSEMU you have
$_external_char_set = "XXX"
"cp437", "cp737", "cp773", "cp775", "cp850", "cp852", "cp857", "cp860", "cp861", "cp862", "cp863", "cp864", "cp865", "cp866", "cp869", "cp874", "cp1125", "cp1251" "iso8859-1", "iso8859-2", "iso8859-3", "iso8859-4", "iso8859-5", "iso8859-6", "iso8859-7", "iso8859-8", "iso8859_9", "iso8859-14", "iso8859-15", "koi8-r" "koi8-u", "koi8-ru", "utf8"
The external character set is used to:
compute the unicode values of characters coming in from the terminal
compute the character set index of unicode characters output to a terminal display screen.
compute the unicode values of characters pasted into dosemu.
compute the unicode values of characters in file names.
If you set a DOS external character set, then it is to the user to load a proper DOS font (cp437.f16, cp850.f16 or cp852.f16 on the console).
$_internal_char_set = "XXX"
"cp437", "cp737", "cp773", "cp775", "cp850", "cp852", "cp857", "cp860", "cp861", "cp862", "cp863", "cp864", "cp865", "cp866", "cp869", "cp874" "cp895", "cp1125", "cp1251", "bg-mik"
The internal character set is used to:
compute the unicode value of characters of video memory, when using DOSEMU in a terminal or using X with a unicode font.
compute the character set index of unicode characters returned by bios keyboard translation services.
compute the unicode values of characters in file names.
This section applies whenever you run DOSEMU remotely, in an xterm or on the Linux console without graphics. Color terminal support is now built into DOSEMU. Skip this section for now to use terminal defaults, until you get DOSEMU to work.
$_term_color = (on) # terminal with color support $_term_updfreq = (4) # time between refreshs (units: 20 == 1 second) $_escchar = (30) # 30 == Ctrl-^, special-sequence prefix
F1 is 'Ctrl-^1', Alt-F7 is 'Ctrl-^s Ctrl-^7'. For online help, press 'Ctrl-^h' or 'Ctrl-^?'.
When running DOSEMU from console (also remote from console) or X you may need to define a proper keyboard layout. It is possible to let DOSEMU do this work automatically for you (see auto below), however, this may fail and you'll end up defining it explicitely. This is done either by choosing one on the internal keytables or by loading an external keytable from DOSEMU_LIB_DIR/keymap/* (which you may modify according to your needs). Both sets have identical names (though you may add any new one to DOSEMU_LIB_DIR/keymap/*):
be finnish hu-latin2 sg-latin1 de finnish-latin1 it sw de-latin1 fr keyb-no uk dk fr-latin1 no-latin1 us dk-latin1 hr-cp852 po dvorak hr-latin2 sf es hu sf-latin1 es-latin1 hu-cwi sg jp106 cz-qwerty cz-qwertz
$_layout = "name"
$_layout = "load de-latin1"
Note, however, that you have to set
$_X_keycode = (on)
The most comfortable method, however, is to first let DOSEMU set the keyboard layout itself. This involves 2 parts and can be done by setting
$_X_keycode = (auto)
$_layout = "auto"
When being on console you might wish to use raw keyboard, especially together with some games, that don't use the BIOS/DOS to get their keystrokes.
$_rawkeyboard = (1)
If DOSEMU is running in its own X-window (not xterm), you may need to tailor it to your needs. Here a summary of the settings and a brief description what they mean. A more detailed description of values one can be found at chapter 2.2.14 (X Support settings) of README-tech.txt
$_X_updfreq = (5) # time between refreshs (units: 20 == 1 second) $_X_title = "DOS in a BOX" # Title in the top bar of the window $_X_icon_name = "xdos" # Text for icon, when minimized $_X_keycode = (off) # on == translate keybord via dosemu keytables $_X_blinkrate = (8) # blink rate for the cursor $_X_font = "" # basename from /usr/X11R6/lib/X11/fonts/misc/* # (without extension) e.g. "vga" $_X_mitshm = (on) # Use shared memory extensions $_X_sharecmap = (off) # share the colormap with other applications $_X_fixed_aspect = (on) # Set fixed aspect for resize the graphics window $_X_aspect_43 = (on) # Always use an aspect ratio of 4:3 for graphics $_X_lin_filt = (off) # Use linear filtering for >15 bpp interpol. $_X_bilin_filt = (off) # Use bi-linear filtering for >15 bpp interpol. $_X_mode13fact = (2) # initial factor for video mode 0x13 (320x200) $_X_winsize = "" # "x,y" of initial windows size $_X_gamma = (1.0) # gamma correction $_X_vgaemu_memsize = (1024) # size (in Kbytes) of the frame buffer # for emulated vga $_X_lfb = (on) # use linear frame buffer in VESA modes $_X_pm_interface = (on) # use protected mode interface for VESA modes $_X_mgrab_key = "" # KeySym name to activate mouse grab, empty == off $_X_vesamode = "" # "xres,yres ... xres,yres" # List of vesamodes to add. The list has to contain # SPACE separated "xres,yres" pairs
The builtin ASPI driver (a SCSI interface protocol defined by Adaptec) can be used to run DOS based SCSI drivers that use this standard (most SCSI devices ship with such a DOS driver). This enables you to run hardware on Linux, that normally isn't supported otherwise, such as CD writers, Scanners e.t.c. The driver was successfully tested with Dat-streamers, EXABYTE tapedrives, JAZ drives (from iomega) and CD writers. To make it work under DOSEMU you need
to configure $_aspi to define which of the /dev/sgX devices you want to show up in DOSEMU.
to load the DOSEMU aspi.sys stub driver within config.sys (e.g. DEVICE=ASPI.SYS) before any ASPI using driver.
The $_aspi variable takes strings listing all generic SCSI devices, that you want give to DOSEMU. NOTE: You should make sure, that they are not used by Linux elsewhere, else you would come into much trouble. To help you not doing the wrong thing, DOSEMU can check the devicetype of the SCSI device such as
$_aspi = "sg2:WORM"
$_aspi = "sg2 sg3 sg4"
$_aspi = "sg1:Direct-Access"
$_aspi = "sg1:0"
$ cat /proc/scsi/scsi
$ scsicheck sg0 scsi0 ch0 ID0 Lun0 ansi2 Direct-Access(0) IBM DCAS-34330 S61A $_aspi = "sg0:Direct-Access:0" (or "0/0/0/0:Direct-Access:0") sg1 scsi0 ch0 ID5 Lun0 ansi2 Direct-Access(0) IOMEGA ZIP 100 D.08 $_aspi = "sg1:Direct-Access:5" (or "0/0/5/0:Direct-Access:5") sg2 scsi0 ch0 ID6 Lun0 ansi2 CD-ROM(5) TOSHIBA CD-ROM XM-5701TA 0167 $_aspi = "sg2:CD-ROM:6" (or "0/0/6/0:CD-ROM:6") <== multiple IDs sg3 scsi1 ch0 ID4 Lun0 ansi2 Sequential-Access(1) HP C1533A 9503 $_aspi = "sg3:Sequential-Access:4" (or "1/0/4/0:Sequential-Access:4") sg4 scsi1 ch0 ID6 Lun0 ansi1 WORM(4) IMS CDD522/10 1.07 $_aspi = "sg4:WORM:6" (or "1/0/6/0:WORM:6") <== multiple IDs
In the above example there are two scsi hostadapters (scsi0 and scsi1) and DOSEMU will not show more than one hostadapter to DOS (mapping them all into one), hence you would get problems accessing sg2 and sg4. For this you may remap a different targetID such as
$_aspi = "sg2:CD-ROM:5 sg4:WORM"
$_aspi = "0/0/6/0:CD-ROM:5 1/0/6/0:WORM"
echo "scsi remove-single-device 0 0 5 0" >/proc/scsi/scsi
echo "scsi add-single-device 0 0 5 0" >/proc/scsi/scsi
Coming so far, one big problem remains: the (hard coded) buffersize for the sg devices in the Linux kernel (default 32k) may be to small for DOS applications and, if your distributor yet didn't it, you may need to recompile your kernel with a bigger buffer. The buffer size is defined in linux/include/scsi/sg.h and to be on the secure side you may define
#define SG_BIG_BUFF (128*1024-512) /* 128 Kb buffer size */
We have simplified the configuration for mice and serial ports and check for depencies between them. If all strings in the below example are empty, then no mouse and/or COM port is available. Note. that you need no mouse.com driver installed in your DOS environment, DOSEMU has the mousedriver builtin. The mouse settings below only apply to DOSEMU in the Linux console; in X and terminals the mouse is detected automatically. The below example is such a setup
$_com1 = "" # e.g. "/dev/mouse" or "/dev/ttyS0" $_com2 = "/dev/modem" # e.g. "/dev/modem" or "/dev/ttyS1" $_mouse = "microsoft" # one of: microsoft, mousesystems, logitech, # mmseries, mouseman, hitachi, busmouse, ps2 $_mouse_dev = "/dev/mouse" # one of: com1, com2 or /dev/mouse $_mouse_flags = "" # list of none or one or more of: # "emulate3buttons cleardtr" $_mouse_baud = (0) # baudrate, 0 == don't set
The above example lets you have your modem on COM2, COM1 is spare (as you may have your mouse under native DOS there and don't want to change the configuration of your modem software between boots of native DOS and Linux)
However, you may use your favorite DOS mouse driver and directly let it drive COM1 by changing the below variables (rest of variables unchanged)
$_com1 = "/dev/mouse" $_mouse_dev = "com1"
And finaly, when you have a PS/2 or USB mouse on your machine you use the built-in mouse driver (not your mouse.com) to get it work: ( again leaving the rest of variables unchanged)
$_mouse = "ps2" $_mouse_dev = "/dev/mouse"
When using a PS/2 or USB mouse or when having more than 2 serial ports you may of course assign _any_ free serialdevice to COM1, COM2. The order doesn't matter:
$_com1 = "/dev/ttyS2" $_com2 = "/dev/ttyS0"
Printer is emulated by piping printer data to your normal Linux printer. The belows tells DOSEMU which printers to use. The `timeout' tells DOSEMU how long to wait after the last output to LPTx before considering the print job as `done' and to close it.
# Print commands to use for LPT1, LPT2 and LPT3. # Default: "lpr -l, lpr -l -P lpt2, lpr -l P lpt3" # Which means: use the default print queue for LPT1, "lpt2" queue for LPT2, # "lpt3" queue for LPT3. "-l" means raw printing mode (no preprocessing). $_lpt1 = "lpr -l" $_lpt2 = "lpr -l -P lpt2" $_lpt3 = "lpr -l -P lpt3" $_printer_timeout = (20)# idle time in seconds before spooling out
The following settings will tell DOSEMU to emulate an SB16 sound card using your Linux sound drivers. For more information see sound-usage.txt.
$_sound = (on) # sound support on/off $_sb_base = (0x220) # base IO-address (HEX) $_sb_irq = (5) # IRQ $_sb_dma = (1) # Low 8-bit DMA channel $_sb_hdma = (5) # High 16-bit DMA channel $_sb_dsp = "/dev/dsp" # Path to the sound device $_sb_mixer = "" # path to the mixer control $_mpu_base = (0x330) # base address for the MPU-401 chip (HEX)
Here are the settings for Joystick emulation.
$_joy_device = "/dev/js0 /dev/js1" # 1st and 2nd joystick device # e.g. "/dev/js0" or "/dev/js0 /dev/js1" # (or "" if you don't want joystick support) # $_joy_dos_min = (1) # range for joystick axis readings, must be > 0 $_joy_dos_max = (150) # avoid setting this to > 250 $_joy_granularity = (1) # the higher, the less sensitive - # useful if you have a wobbly joystick # $_joy_latency = (1) # delay between nonblocking linux joystick reads # increases performance if >0 and processor>=Pentium # recommended: 1-50ms or 0 if unsure
Turn the following option `on' if you require IPX/SPX emulation, there is no need to load IPX.COM within the DOS session. ( the option does not emulate LSL.COM, IPXODI.COM, etc. ) And NOTE: You must have IPX protocol configured into the kernel.
$_ipxsupport = (on)
Enable Novell 8137->raw 802.3 translation hack in new packet driver.
$_novell_hack = (on)
If you make use of TUN/TAP or the dosnet device driver, then you can select it via
$_vnet = "tap"
$_vnet = "dosnet"
But if you just need 'single' packet driver support that talks to, for instance, your ethernet card eth0 then you need to set
$_netdev = "eth0"
Note that dosnet and eth0 require raw packet access, and hence (suid)-root. If $_vnet = "dosnet", then $_netdev will default to "dsn0". If you would like to use persistent TUN/TAP devices then you need to specifify the TAP device in $_netdev. For more on this look at chapter 15 (Networking using DOSEMU).
The following settings (together with the direct console video settings below make it possible for DOSEMU to access your real (non-emulated) computer hardware directly. Because Linux does not permit this for ordinary users, DOSEMU needs to be run as root, via sudo or suid-root to be able to use these settings. They can NOT be overwritten by the user configuration file ~/.dosemurc. You must also run dosemu with the "-s" switch. This activates sudo when appropriate; without it, even root will not get direct hardware access.
Here you tell DOSEMU what to do when DOS wants let play the speaker:
$_speaker = "" # or "native" or "emulated"
And with the below may gain control over real ports on you machine. But:
WARNING: GIVING ACCESS TO PORTS IS BOTH A SECURITY CONCERN AND SOME PORTS ARE DANGEROUS TO USE. PLEASE SKIP THIS SECTION, AND DON'T FIDDLE WITH THIS SECTION UNLESS YOU KNOW WHAT YOU'RE DOING.
$_ports = "" # list of portnumbers such as "0x1ce 0x1cf 0x238" # or "0x1ce range 0x280,0x29f 310" # or "range 0x1a0,(0x1a0+15)"
If you have hardware, that is not supported under Linux but you have a DOS driver for, it may be necessary to enable IRQ passing to DOS. Note that IRQ passing does not work on x86-64.
$_irqpassing = "" # list of IRQ number (2-15) to pass to DOS such as # "3 8 10"
!!WARNING!!: IF YOU ENABLE GRAPHICS ON AN INCOMPATIBLE ADAPTOR, YOU COULD GET A BLANK SCREEN OR MESSY SCREEN EVEN AFTER EXITING DOSEMU. Read doc/README-tech.txt (Recovering the console after a crash).
Start with only text video using the following setup
$_video = "vga" # one of: plainvga, vga, ega, mda, mga, cga $_console = (0) # use 'console' video $_graphics = (0) # use the cards BIOS to set graphics $_vbios_seg = (0xc000) # set the address of your VBIOS (e.g. 0xe000) $_vbios_size = (0x10000)# set the size of your BIOS (e.g. 0x8000) $_vmemsize = (0) # amount of video RAM to save/restore $_chipset = "" $_dualmon = (0) # if you have one vga _plus_ one hgc (2 monitors)
After you get it `somehow' working and you have one of the DOSEMU supported graphic cards you may switch to graphics mode changing the below
$_graphics = (1) # use the cards BIOS to set graphics
If you have a 100% compatible standard VGA card that may work, however, you get better results, if your card has one of the DOSEMU supported video chips and you tell DOSEMU to use it such as
$_chipset = "s3" # one of: plainvga, trident, et4000, diamond, s3, # avance, cirrus, matrox, wdvga, paradise, ati, sis, # svgalib, vesa
Note, `s3' is only an example, you must set the correct video chip else it most like will crash your screen.
The 'svgalib' setting uses svgalib 1.9.21 or greater for determining the correct video chip.
The 'vmemsize' setting's default of 0 causes DOSEMU to try to autodetect the amount of video memory on the graphics card. This amount is saved and restored when you switch away from and back to the virtual console DOSEMU runs in using the Ctrl-Alt-Fn key combination. Since saving video memory can be a very slow operation you may want to restrict 'vmemsize' to a value that was more common when DOS was still mainstream. For instance 1024 covers it if you want to be able to save and restore modes up to 1024x768x256.
NOTE: `video setting' can not be overwritten by ~/.dosemurc.
By Paul Crawford. This is a short guide to the time modes supported in DOSEMU; you can get a more detailed description of how and why they operate at http://www.sat.dundee.ac.uk/~psc/dosemu_time_advanced.html. There are three modes currently supported using the $_timemode variable:
$_timemode = "bios" $_timemode = "pit" $_timemode = "linux"
In BIOS mode, the DOSEMU session begins with the current (local) date & time, and once running it behaves fully like an emulated PC. You can set the date & time using the normal DOS methods as you would expect. However, time keeping accuracy in the long term under DOS was never very good, and under DOSEMU it is typically poorer.
In LINUX mode, the emulated PC always reports the current host time, and so you no longer have the option to set the DOS time (the date can be set, which is odd, as this is kept in DOS and not in the emulator). In this mode you get the long term accuracy of the host, so if you are running NTP or similar, you always get accurate time.
A reasonable question for some applications is "how do I get accurate UTC time?", of course, the more general question is about running the emulated DOS session in a different timezone and/or with differing "daylight saving" options to the host computer. This is quite simple in fact, just start DOSEMU with the environment variable TZ set to the required zone, and don't forget to have the corresponding command in the DOS autoexec.bat file (otherwise Microsoft products all assume -8 hours PST!). The DOSEMU emulation of file system access is also based on the local timezone it is running in, so you will get consistent file time stamps compared to the emulated time. So in the UTC case, you would start DOSEMU in a shell with TZ=GMT0, and have a line in autoexec.bat with "set TZ=GMT0" before any of your programs are run.