This documents the cdrom extension rucker@astro.uni-bonn.de has written for Dosemu.
An easy way to access files on a CDROM is to mount it in Linux and use Lredir to refer to it. However, any low-level access, often used by games is impossible that way, unless you use the C option. For that you need to load some drivers in DOS. CDROM image files (ISOs) can be used in a similar fashion.
The driver consists of a server on the Linux side (src/dosext/drivers/cdrom.c, accessed via int 0xe6 handle 0x40) and a device driver (src/commands/cdrom.S) on the DOS side.
Please send any suggestions and bug reports to <rucker@astro.uni-bonn.de>
To install it:
Create a (symbolic) link /dev/cdrom to the device file of your drive or use the cdrom statement in dosemu.conf to define it.
Make sure that you have read/write access to the device file of your drive, otherwise you won't be able to use the cdrom under Dosemu directly because of security reasons.
Load cdrom.sys within your config.sys file with e.g.:
devicehigh=d:\dosemu\cdrom.sys |
Mount the CD-ROM in Linux (some distributions do this automatically), and use
lredir e: linux\fs/media/cdrom c |
to access the CD-ROM as drive E:. The "C" option specifies that the low-level access provided via cdrom.sys is used. Or ... start Microsoft cdrom extension as follows:
mscdex /d:mscd0001 /l:driveletter |
shsucdex /d:mscd0001 /l:driveletter |
To change the cd while Dosemu is running, use the DOS program 'eject.com'. If is not possible to change the disk, when the drive has been opened by another process (e.g. mounted), then you need to unmount it first!
Lredir has the advantage of supporting long file names, and not using any DOS memory, whereas MS/SHSUCDX are more low-level and perhaps more compatible. You would need to use a DOS TSR driver such as DOSLFN to use long file names with SHSUCDX.
Remarks by zimmerma@rz.fht-esslingen.de:
This driver has been successfully tested with Linux' SCSI CDROMS by the author, with the Mitsumi driver mcd.c and with the Aztech/Orchid/Okano/Wearnes- CDROM driver aztcd.c by me. With the latter CDROM-drives changing the CD-ROM is not recognized correctly by the drive under all circumstances and is therefore disabled. So eject.com will not work. For other CD-ROM drives you may enable this feature by setting the variable 'eject_allowed = 1' in file dosemu/drivers/cdrom.c (you'll find it near the top of the file). With the mcd.c and aztcd.c Linux drivers this may cause your system to hang for some 30 seconds (or even indefinitely), so don't change the default value 'eject_allowed = 0'.
Support for up to 4 drives:
If you have more then one cdrom, you can use the cdrom statement in dosemu.conf like this:
$_cdrom = "/dev/cdrom /dev/cdrom2 image.iso" |
device=cdrom.sys
device=cdrom.sys 2
device=cdrom.sys 3 |
The one and only parameter to the device driver is a digit between 1 and 4, (if its missing then 1 is assumed) for the DOS devices MSCD0001, MSCD0002 ... MSCD0004 respectively. You then also need to use lredir or tell MSCDEX about these drivers such as
lredir e: linux\fs/media/cdrom c
lredir f: linux\fs/media/cdrom2 c 2
lredir g: linux\fs/media/cdrom3 c 3 |
mscdex /d:mscd0001 /d:mscd0002 /l:driveletter |
History:
Release with dosemu.0.60.0 Karsten Rucker (rucker@astro.uni-bonn.de) April 1995
Additional remarks for mcd.c and aztcd.c Werner Zimmermann (zimmerma@rz.fht-esslingen.de) May 30, 1995
Release with dosemu-0.99.5 Manuel Villegas Marin (manolo@espanet.com) Support for up to 4 drives December 4, 1998